| |
|
| |
| |
|
| Brand |
Roaches |
| Equipment |
Martindale Abrasion & Pilling Tester |
| Application |
To determine abrasion resistance
by the number of rubs to breakdown, loss in mass of the specimens
and the testing pilling on the abrasion is formed after a given
number of rubs are counted. |
| Standard |
ASTM D4966, D4970, BS 3424,
5690, BS EN ISO 12947-1, 12945-2, M&S P17, P19, P19A, P19B,
IWS TM112, 196, SN 198525, 198529, etc. |
| Features |
| • |
The Roaches Martindale APS has been designed using the
latest electronic technology and materials. |
| • |
Available with 4, 6 or 8 workstations and all feature
the same state of the art control system. |
| • |
Choice of three operating modes.
- Standard Mode : giving one preset value for all
positions.
- Multiple Preset Mode : all workstations can be set
to different preset values allowing multiple tests
on one machine, also any user influences can be allowed
for within the test as each workstation will stop
the machine when its count has been achieved.
- Counter Profile mode : up to 5 individual counters
can be preset to different values, allowing tests
to be pre configured at the start.
|
| • |
Counters can be turned on or off for any position at
any time, giving the user the facility to check one workstation
whilst continuing to run the other workstations. |
| • |
Individual counter per position. |
| • |
Individual Alarm per workstation, when in Multiple Preset
Mode. |
| • |
Time remaining per workstation, when in Multiple Preset
Mode. |
| • |
Progress bar and time of finish, allowing the user to
manage their time around the test cycle. |
| • |
Abradant check alarm, with individual alarms for each
workstation. |
| • |
Integrated motor protection within the controller. |
| • |
Integrated help pages. |
| • |
Other languages available on request. |
|
| Power
Supply |
220V or 110V |
|
| |
|
|
